Pins for receiver cords. Package of 5 pins.

Instructions given so you can easily install your own candlestick receiver pins. You receive 5 pins.

                  Here are the instructions 

Drill a hole in a scrap piece of 2 x 4 wood deep enough to hold the pin above the surface for your pin

Crimp a spade on each end of your cloth wire

 Now break off the ends of the spades leaving only the metal collar on both ends 

 Break  a tiny piece of solder off and put it in the pin 

 Put the collar and cloth  wire in the pin

Heat up the pin with a good soldering gun until you see a little smoke coming from the melted solder Then quickly push down on the collared lead to set the pin in the hot solder 

 Let cool or take a wet rag to cool the pin.